BSWM-4X4ER

Bi-Directional 4X4 Switch Matrix

Modern communication standards like cellular, WiFi, ISM and Bluetooth need bidirectional signal transmissions, independent of the multiplex method: TDD (Time Domain Division) or FDD (Frequency Domain Division). BSWM-4X4ER is right solution to route communication testers to DUTs (Devices under Test) or transceivers to antennas. It offers 4 full parallel bidirectional signal paths. Through its extremely wideband frequency range the device is capable of working with latest standards such as Wi-Fi 6E.


Wear-free Solid State Switches

The switching elements in the BSWM-4X4ER are solid state types. This ensures the short switching time, a huge number of switching cycles with a minimum in maintenance. The RF ports are non-reflective. Also in the case of an open switch the RF port of the matrix is terminated with 50 ohms.

High Channel Isolation

To avoid unwanted signal couplings between the channels BSWM-4X4ER has high channel isolation. Adjacent channels with strong and weak signals have no influence to each other.

Versatile Control

The device can be controlled either via the remote interfaces LAN and USB (SCPI-based ASCII-commands) or local via a MMI (Man Machine Interface) on the front panel. Additional BSWM-4X4ER offers a web based, user friendly GUI (Graphical User Interface).

 





 
 

This is a captcha-picture. It is used to prevent mass-access by robots. (see: www.captcha.net)

键入您在框中看到的字符(6 个字符)。 该代码可以包含字符0..9A..Z.

  

letzte Änderung: 16.11.2021