80 W Linear FM Power Amplifier

AMP7610849L from Becker Nachrichtentechnik is a compact amplifier module specially designed for professional FM or IBOC broadcast radio applications. The robust electric and mechanic design guarantees solid operations over a long time. Internal filters and low noise voltage supplies offer high suppression of spurious. To avoid damages during installation the supply is protected against reverse polarity. The amplifier module is supplied with a single DC voltage, which presence is indicated by a LED on the module as well as the module status. The RF connectors are SMA female type. AMP7610849L is designed for mounting on an external heat sink. All amplifier models of the AMP series are designed in 50 Ohm technology.

76 ... 108 MHz

Special Features

The high IP3 properties make the amplifier module suitable in professional applications where digital modulated signals or multi carrier signals must amplified without any distortion effects.
An internal self-test function monitors current consumption and module temperature. In the case of exceeding limits an open drain output is opened and the status is signalized by the LED at the module.

Tolerant to Mismatches

Using power transistors with enough head room to maximum ratings make the amplifier module robust against reverse power and therefore robust against loads at the output which are not matched. The output of the amplifier module is robust against open and short load at the output.

Rugged Design

The amplifier is housed is a milled aluminium case. This saves the circuits against mechanical damage and gives best shielding for avoiding EMI influences caused by radio signals coming from the environment.


This is a captcha-picture. It is used to prevent mass-access by robots. (see:

键入您在框中看到的字符(6 个字符)。 该代码可以包含字符0..9A..Z.


letzte Änderung: 01.12.2021